meme-chip [options] [-db <motif file>]* <primary sequence file>
(Optional but recommended) The names of one or more files containing MEME formatted motifs. Outputs from MEME and DREME are supported, as well as Minimal MEME Format. You can convert many other motif formats to MEME Motif format using conversion scripts available with the MEME Suite. These motif file(s) will used by Tomtom and CentriMo.
The name of a file of sequences in FASTA format. Ideally the sequences should be all the same length, between 100 and 500 base-pairs long and centrally enriched for motifs. The immediate regions around individual ChIP-seq "peaks" from a transcription factor (TF) ChIP-seq experiment are ideal. The suggested 100 base-pair minimum size is based on the typical resolution of ChIP-seq peaks but it is useful to have more of the surrounding sequence to give CentriMo the power to tell if a motif is centrally enriched. We recommend that you "repeat mask" your sequences, replacing repeat regions to the "N" character.
MEME-ChIP writes its output to files in a directory named
memechip_out, which it creates if necessary. You can change the
output directory using the -o or -oc options.
The directory will contain the following files:
meme-chip.html -
an HTML file that provides the results in an interactive, human-readable format that contains
links to the other files produced by the analyses performed by MEME-ChIP
summary.tsv -
a TSV (tab-separated values) file that provides
a summary of the results in a format suitable for parsing by scripts and viewing with Excel
combined.meme -
a text file that contains all the motifs identified by MEME-ChIP
in MEME Motif Format
In addition, the MEME-ChIP output directory will contain sub-directories with the results of each of the individual analyses it performed. The results in these directories are all linked to from the MEME-ChIP HTML output file.
Note: See this detailed description of the MEME-ChIP output formats for more information.
| Option | Parameter | Description | Default Behavior |
|---|---|---|---|
| General Options | |||
| -db | file | Use file containing DNA motifs in MEME Motif format. This file will used by Tomtom and CentriMo. This option may be used multiple times to pass multiple files. | When no files are provided, Tomtom can't suggest similar motifs and CentriMo is limited to the discovered motifs. | -neg | file | MEME-ChIP will look for motifs enriched in the primary sequences relative to this control set of sequences in FASTA format. These sequences will be input as control sequences to MEME, DREME and CentriMo. MEME will use its "Differential Enrichment" objective function. When this option is used, the primary and control sequences should all be the same length; otherwise CentriMo E-values will be inaccurate. If the primary sequences are ChIP-seq peak regions from a transcription factor ChIP-seq experiment, similar regions from a knockout cell line or organism are a possible choices for control sequences. The control sequences should be prepared in exactly the same way (e.g., repeat-masking) as the primary sequences. | No control sequences are used for MEME or CentriMo. MEME uses the "Classic" objective function. For DREME, the positive sequences are shuffled, preserving dinucleotide frequencies, to create the control set. | -psp-gen | Use psp-gen
to create a position-specific prior
for use by MEME. MEME will use this prior and the
"Classic" objective function,
rather than the "Differential Enrichment" objective function.
Note1: Requires the -neg option.
Note2: This was the default prior to MEME Suite version 5.0. |
MEME uses the control sequences directly via its "Differential Enrichment" objective function, and no position-specific prior is created. |
| -bfile | file | Pass the file specifying a background model in Markov Background Model Format to programs that support a background model (MEME, CentriMo, FIMO, SpaMo and Tomtom). Consult the documentation for those programs for details on how they use the background model. Basically, you can use a background model in order to normalize for biased distribution of letters and groups of letters in your sequences. A 0-order model adjusts for single letter biases, a 1-order model adjusts for dimer biases (e.g., GC content in DNA sequences), etc. | A 0-order Markov background model is calculated from the input sequences and then passed by MEME-ChIP to the programs that support background models. |
| -order | order | Set the order of the Markov background model that is generated from the input sequences when a background model is not specified via -bfile. | A Markov background model of order 1 is generated and passed to the programs that support it. |
| -seed | seed | The seed for the randomized selection of sequences for MEME. | A seed value of 1 is used. |
| -ccut | size | For input to MEME and DREME, trim sequences to their central region of size base-pairs. (The full-length sequences are input to CentriMo and SpaMo.) A value of 0 indicates that sequences should not be trimmed before being passed to MEME and DREME. | A maximum size of 100 is used. |
| -group-thresh | gthr | Main threshold for clustering highly similar motifs in MEME-ChIP output. All motifs in a group will have a Tomtom E-value less than or equal to gthr when compared to the seed motif for the group, which is the most significant motif in the group. | A value of 0.05 is used. |
| -group-weak | wthr | Secondary threshold for clustering highly similar motifs in MEME-ChIP output. If this is specified by the user, groups will be merged into a more significant group if all their motifs are weakly similar to the seed motif of the more significant group. wthr specifies the Tomtom E-value threshold for merging groups. | Set to be equal to twice the value of the main clustering threshold: 2 * gthr. |
| -filter-thresh | fthr | E-value threshold for including motifs in the output. | A value of 0.05 is used. |
| -time | minutes | The maximum time that MEME-ChIP is allowed to run before terminating itself gracefully. | There is no time limit |
| -desc | description | A description of the MEME-ChIP run which is displayed in the summary file. | No description is displayed in the summary file. |
| -fdesc | file | A file containing a description of the MEME-ChIP run which will be included in the summary file. The summary file will try to preserve some of the formatting by presenting blocks of text separated by multiple new lines as different paragraphs and replacing single new line characters with line breaks. Only the first 500 characters are used. | No description is displayed in the summary file. |
| -norc | Find motifs in given strand only. | Find motifs in both strands. | |
| -old-clustering | Pick seed motifs for clustering based only on significance; | Discovered motifs are preferentially used as seed motifs for clustering. | |
| -noecho | Don't echo the commands run. | Echo the commands run to standard output. | |
| MEME Specific Options | |||
| -meme-brief | nbrief | If there are more than nbrief (primary) sequences, the size of MEME's output will be reduced by suppressing the inclusion of the sequence names, motif sites and scanned sites in MEME's HTML and XML outputs, and by suppressing the tables of sequence lengths, sites and block diagrams in MEME's text output. | A value of 1000 is used for nbrief. |
| -meme-mod | oops|zoops|anr | The number of motif sites that MEME will find per sequence.
oops - One Occurrence Per Sequence,
See -mod in the
MEME command-line documentation.
zoops - Zero or One Occurrence Per Sequence, anr - Any Number of Repetitions |
MEME defaults to using zoops mode. |
| -meme-minw | width | The minimum motif width that MEME should find. | A minimum width of 6 is used unless the maximum width has been set to be less than 6 in which case the maximum width is used. |
| -meme-maxw | width | The maximum motif width that MEME should find. | A maximum width of 30 is used unless the minimum width has been set to be larger than 30 in which case the minimum width is used. |
| -meme-nmotifs | num | The number of motifs that MEME should search for. If num is 0, MEME will not be run. | MEME will find 3 motifs. |
| -meme-minsites | sites | The minimum number of sites that MEME needs to find for a motif. | MEME doesn't require any minimum number of sites for a motif. |
| -meme-maxsites | sites | The maximum number of sites that MEME will find for a motif. | MEME doesn't limit the number of sites it will find for a motif. |
| -meme-p | np | Use faster, parallel version of MEME with np processors.
The parameter np may be a number or it
may be a quoted string starting with a number and followed by arguments
to the particular MPI run command for your installation (e.g., mpirun). |
Use a single processor. |
| -meme-pal | Restrict MEME to searching for palindromes only. | MEME searches for any motif, not just palindromes. | |
| -meme-searchsize | searchsize | The maximum portion of the primary sequences (in characters) used by MEME in searching for motifs. See the documentation on the MEME -searchsize option in the MEME documentation for more details. | MEME performs sampling if the primary sequences contain more than 100,000 characters. |
| -meme-norand | If your (primary) sequences are sorted in order of confidence (best to worst) then you should select this option. See the MEME documentation for the -norand option for more details. | >MEME randomly selects the (primary) sequences to include in its initial analysis if there are more than searchsize primary sequences. | |
| DREME Specific Options | |||
| -dreme-e | E-value | Stop searching for more motifs if the next best motif found has a worse E-value | An E-value threshold of 0.05 is used. |
| -dreme-m | count | Stop searching for more motifs if count motifs have been found. If count is 0, DREME will not be run. | There is no limit on the number of motifs. |
| CentriMo Specific Options | |||
| -centrimo-local | CentriMo perform local motif enrichment analysis, computing enrichment in every possible sequence region. | CentriMo will perform central motif enrichment analysis, computing enrichment in centered regions only. | |
| -centrimo-score | score | Set the minimum accepted score for a match. | A minimum score of 5 is used. |
| -centrimo-maxreg | region | Set the size of the maximum region size tested. | CentriMo will test all valid region sizes. |
| -centrimo-ethresh | E-value | Set the E-value threshold for reporting enriched central regions. | An E-value threshold of 10 will be used. |
| -centrimo-noseq | Do not store sequence IDs in the output of CentriMo. | CentriMo stores a list of the sequence IDs with matches in the best region for each motif. | |
| -centrimo-flip | Reflect the positions of matches on the reverse strand around the center. | Matches on the reverse strand are counted where they occur in the sequence. | |
| SpaMo Specific Options | |||
| -spamo-skip | Do not run SpaMo. Can be combined with options -meme-nmotifs 0, -dreme-m 0, and -fimo-skip to use MEME-ChIP to run CentriMo and cluster the significant motifs. | Run SpaMo using most significant motif from each cluster as primary. | |
| FIMO Specific Options | |||
| -fimo-skip | Do not run FIMO. Can be combined with options -meme-nmotifs 0, -dreme-m 0, and -spamo-skip to use MEME-ChIP to run CentriMo and cluster the significant motifs. | Run FIMO using most significant motif from each cluster to scan input sequences. | |
If you use MEME-ChIP in your research, please cite the following paper:
Philip Machanick and Timothy L. Bailey, "MEME-ChIP: motif analysis of large DNA datasets",
Bioinformatics, 2712, 1696-1697, 2011.
[full text]