Data Structures
struct	opj_mqc_state
	This struct defines the state of a context. More...

struct	opj_mqc
	MQ coder More...

Macros
#define	MQC_NUMCTXS 19

Typedefs
typedef struct opj_mqc_state	opj_mqc_state_t
	This struct defines the state of a context. More...

typedef struct opj_mqc	opj_mqc_t
	MQ coder More...

Local static functions
static void	opj_mqc_byteout (opj_mqc_t *mqc)
	Output a byte, doing bit-stuffing if necessary. More...

static void	opj_mqc_renorme (opj_mqc_t *mqc)
	Renormalize mqc->a and mqc->c while encoding, so that mqc->a stays between 0x8000 and 0x10000 More...

static void	opj_mqc_codemps (opj_mqc_t *mqc)
	Encode the most probable symbol More...

static void	opj_mqc_codelps (opj_mqc_t *mqc)
	Encode the most least symbol More...

static void	opj_mqc_setbits (opj_mqc_t *mqc)
	Fill mqc->c with 1's for flushing More...

Exported functions
OPJ_UINT32	opj_mqc_numbytes (opj_mqc_t *mqc)
	Return the number of bytes written/read since initialisation More...

void	opj_mqc_resetstates (opj_mqc_t *mqc)
	Reset the states of all the context of the coder/decoder (each context is set to a state where 0 and 1 are more or less equiprobable) More...

void	opj_mqc_setstate (opj_mqc_t *mqc, OPJ_UINT32 ctxno, OPJ_UINT32 msb, OPJ_INT32 prob)
	Set the state of a particular context More...

void	opj_mqc_init_enc (opj_mqc_t mqc, OPJ_BYTE bp)
	Initialize the encoder More...

void	opj_mqc_encode (opj_mqc_t *mqc, OPJ_UINT32 d)
	Encode a symbol using the MQ-coder More...

void	opj_mqc_flush (opj_mqc_t *mqc)
	Flush the encoder, so that all remaining data is written More...

void	opj_mqc_bypass_init_enc (opj_mqc_t *mqc)
	BYPASS mode switch, initialization operation. More...

OPJ_UINT32	opj_mqc_bypass_get_extra_bytes (opj_mqc_t *mqc, OPJ_BOOL erterm)
	Return number of extra bytes to add to opj_mqc_numbytes() for the² size of a non-terminating BYPASS pass. More...

void	opj_mqc_bypass_enc (opj_mqc_t *mqc, OPJ_UINT32 d)
	BYPASS mode switch, coding operation. More...

void	opj_mqc_bypass_flush_enc (opj_mqc_t *mqc, OPJ_BOOL erterm)
	BYPASS mode switch, flush operation More...

void	opj_mqc_reset_enc (opj_mqc_t *mqc)
	RESET mode switch More...

void	opj_mqc_restart_init_enc (opj_mqc_t *mqc)
	RESTART mode switch (TERMALL) reinitialisation More...

void	opj_mqc_erterm_enc (opj_mqc_t *mqc)
	ERTERM mode switch (PTERM) More...

void	opj_mqc_segmark_enc (opj_mqc_t *mqc)
	SEGMARK mode switch (SEGSYM) More...

void	opj_mqc_init_dec (opj_mqc_t mqc, OPJ_BYTE bp, OPJ_UINT32 len, OPJ_UINT32 extra_writable_bytes)
	Initialize the decoder for MQ decoding. More...

void	opj_mqc_raw_init_dec (opj_mqc_t mqc, OPJ_BYTE bp, OPJ_UINT32 len, OPJ_UINT32 extra_writable_bytes)
	Initialize the decoder for RAW decoding. More...

void	opq_mqc_finish_dec (opj_mqc_t *mqc)
	Terminate RAW/MQC decoding More...

#define	opj_mqc_setcurctx(mqc, ctxno) (mqc)->curctx = &(mqc)->ctxs[(OPJ_UINT32)(ctxno)]
	Set the current context used for coding/decoding More...

Detailed Description

Macro Definition Documentation

◆ MQC_NUMCTXS

#define MQC_NUMCTXS 19

Referenced by opj_mqc_resetstates().

◆ opj_mqc_setcurctx

#define opj_mqc_setcurctx	(	mqc,
		ctxno
	)	(mqc)->curctx = &(mqc)->ctxs[(OPJ_UINT32)(ctxno)]

Set the current context used for coding/decoding

Parameters

mqc	MQC handle
ctxno	Number that identifies the context

Referenced by opj_mqc_init_dec(), opj_mqc_init_enc(), opj_mqc_segmark_enc(), opj_t1_dec_clnpass_check_segsym(), opj_t1_enc_clnpass(), opj_t1_enc_clnpass_step(), opj_t1_enc_refpass_step(), and opj_t1_enc_sigpass_step().

Typedef Documentation

◆ opj_mqc_state_t

typedef struct opj_mqc_state opj_mqc_state_t

This struct defines the state of a context.

◆ opj_mqc_t

typedef struct opj_mqc opj_mqc_t

MQ coder

Function Documentation

◆ opj_mqc_bypass_enc()

void opj_mqc_bypass_enc	(	opj_mqc_t *	mqc,
		OPJ_UINT32	d
	)

BYPASS mode switch, coding operation.

JPEG 2000 p 505.

Parameters

mqc	MQC handle
d	The symbol to be encoded (0 or 1)

References opj_mqc::bp, BYPASS_CT_INIT, opj_mqc::c, and opj_mqc::ct.

Referenced by opj_t1_enc_refpass_step(), and opj_t1_enc_sigpass_step().

◆ opj_mqc_bypass_flush_enc()

void opj_mqc_bypass_flush_enc	(	opj_mqc_t *	mqc,
		OPJ_BOOL	erterm
	)

BYPASS mode switch, flush operation

Parameters

mqc	MQC handle
erterm	1 if ERTERM is enabled, 0 otherwise

References opj_mqc::bp, opj_mqc::c, and opj_mqc::ct.

Referenced by opj_t1_encode_cblk().

◆ opj_mqc_bypass_get_extra_bytes()

OPJ_UINT32 opj_mqc_bypass_get_extra_bytes	(	opj_mqc_t *	mqc,
		OPJ_BOOL	erterm
	)

Return number of extra bytes to add to opj_mqc_numbytes() for the² size of a non-terminating BYPASS pass.

Parameters

mqc	MQC handle
erterm	1 if ERTERM is enabled, 0 otherwise

References opj_mqc::bp, and opj_mqc::ct.

Referenced by opj_t1_encode_cblk().

◆ opj_mqc_bypass_init_enc()

void opj_mqc_bypass_init_enc ( opj_mqc_t * mqc )

BYPASS mode switch, initialization operation.

JPEG 2000 p 505.

Parameters

mqc	MQC handle

References opj_mqc::bp, BYPASS_CT_INIT, opj_mqc::c, opj_mqc::ct, and opj_mqc::start.

Referenced by opj_t1_encode_cblk().

◆ opj_mqc_byteout()

static void opj_mqc_byteout ( opj_mqc_t * mqc )

static

Output a byte, doing bit-stuffing if necessary.

After a 0xff byte, the next byte must be smaller than 0x90.

Parameters

mqc	MQC handle

References opj_mqc::bp, opj_mqc::c, opj_mqc::ct, and opj_mqc::start.

Referenced by opj_mqc_erterm_enc(), opj_mqc_flush(), and opj_mqc_renorme().

◆ opj_mqc_codelps()

static void opj_mqc_codelps ( opj_mqc_t * mqc )

static

Encode the most least symbol

Parameters

mqc	MQC handle

References opj_mqc::a, opj_mqc::c, opj_mqc::curctx, and opj_mqc_renorme().

Referenced by opj_mqc_encode().

◆ opj_mqc_codemps()

static void opj_mqc_codemps ( opj_mqc_t * mqc )

static

Encode the most probable symbol

Parameters

mqc	MQC handle

References opj_mqc::a, opj_mqc::c, opj_mqc::curctx, and opj_mqc_renorme().

Referenced by opj_mqc_encode().

◆ opj_mqc_encode()

void opj_mqc_encode	(	opj_mqc_t *	mqc,
		OPJ_UINT32	d
	)

Encode a symbol using the MQ-coder

Parameters

mqc	MQC handle
d	The symbol to be encoded (0 or 1)

References opj_mqc::curctx, opj_mqc_codelps(), and opj_mqc_codemps().

Referenced by opj_mqc_segmark_enc(), opj_t1_enc_clnpass(), opj_t1_enc_clnpass_step(), opj_t1_enc_refpass_step(), and opj_t1_enc_sigpass_step().

◆ opj_mqc_erterm_enc()

void opj_mqc_erterm_enc ( opj_mqc_t * mqc )

ERTERM mode switch (PTERM)

Parameters

mqc	MQC handle

References opj_mqc::bp, opj_mqc::c, opj_mqc::ct, and opj_mqc_byteout().

Referenced by opj_t1_encode_cblk().

◆ opj_mqc_flush()

void opj_mqc_flush ( opj_mqc_t * mqc )

Flush the encoder, so that all remaining data is written

Parameters

mqc	MQC handle

References opj_mqc::bp, opj_mqc::c, opj_mqc::ct, opj_mqc_byteout(), and opj_mqc_setbits().

Referenced by opj_t1_encode_cblk().

◆ opj_mqc_init_dec()

void opj_mqc_init_dec	(	opj_mqc_t *	mqc,
		OPJ_BYTE *	bp,
		OPJ_UINT32	len,
		OPJ_UINT32	extra_writable_bytes
	)

Initialize the decoder for MQ decoding.

opj_mqc_finish_dec() must be absolutely called after finishing the decoding passes, so as to restore the bytes temporarily overwritten.

Parameters

mqc	MQC handle
bp	Pointer to the start of the buffer from which the bytes will be read Note that OPJ_COMMON_CBLK_DATA_EXTRA bytes at the end of the buffer will be temporarily overwritten with an artificial 0xFF 0xFF marker. (they will be backuped in the mqc structure to be restored later) So bp must be at least len + OPJ_COMMON_CBLK_DATA_EXTRA large, and writable.
len	Length of the input buffer
extra_writable_bytes	Indicate how many bytes after len are writable. This is to indicate your consent that bp must be large enough.

References opj_mqc::a, opj_mqc::bp, opj_mqc::c, opj_mqc::ct, opj_mqc::end_of_byte_stream_counter, opj_mqc_bytein(), opj_mqc_init_dec_common(), and opj_mqc_setcurctx.

Referenced by opj_t1_decode_cblk().

◆ opj_mqc_init_enc()

void opj_mqc_init_enc	(	opj_mqc_t *	mqc,
		OPJ_BYTE *	bp
	)

Initialize the encoder

Parameters

mqc	MQC handle
bp	Pointer to the start of the buffer where the bytes will be written

References opj_mqc::a, opj_mqc::bp, opj_mqc::c, opj_mqc::ct, opj_mqc::end_of_byte_stream_counter, opj_mqc_setcurctx, and opj_mqc::start.

Referenced by opj_t1_encode_cblk().

◆ opj_mqc_numbytes()

OPJ_UINT32 opj_mqc_numbytes ( opj_mqc_t * mqc )

Return the number of bytes written/read since initialisation

Parameters

mqc	MQC handle

Returns: Returns the number of bytes already encoded

References opj_mqc::bp, and opj_mqc::start.

Referenced by opj_t1_encode_cblk().

◆ opj_mqc_raw_init_dec()

void opj_mqc_raw_init_dec	(	opj_mqc_t *	mqc,
		OPJ_BYTE *	bp,
		OPJ_UINT32	len,
		OPJ_UINT32	extra_writable_bytes
	)

Initialize the decoder for RAW decoding.

opj_mqc_finish_dec() must be absolutely called after finishing the decoding passes, so as to restore the bytes temporarily overwritten.

Parameters

mqc	MQC handle
bp	Pointer to the start of the buffer from which the bytes will be read Note that OPJ_COMMON_CBLK_DATA_EXTRA bytes at the end of the buffer will be temporarily overwritten with an artificial 0xFF 0xFF marker. (they will be backuped in the mqc structure to be restored later) So bp must be at least len + OPJ_COMMON_CBLK_DATA_EXTRA large, and writable.
len	Length of the input buffer
extra_writable_bytes	Indicate how many bytes after len are writable. This is to indicate your consent that bp must be large enough.

References opj_mqc::c, opj_mqc::ct, and opj_mqc_init_dec_common().

Referenced by opj_t1_decode_cblk().

◆ opj_mqc_renorme()

static void opj_mqc_renorme ( opj_mqc_t * mqc )

static

Renormalize mqc->a and mqc->c while encoding, so that mqc->a stays between 0x8000 and 0x10000

Parameters

mqc	MQC handle

References opj_mqc::a, opj_mqc::c, opj_mqc::ct, and opj_mqc_byteout().

Referenced by opj_mqc_codelps(), and opj_mqc_codemps().

◆ opj_mqc_reset_enc()

void opj_mqc_reset_enc ( opj_mqc_t * mqc )

RESET mode switch

Parameters

mqc	MQC handle

References opj_mqc_resetstates(), opj_mqc_setstate(), T1_CTXNO_AGG, T1_CTXNO_UNI, and T1_CTXNO_ZC.

Referenced by opj_t1_encode_cblk().

◆ opj_mqc_resetstates()

void opj_mqc_resetstates ( opj_mqc_t * mqc )

Reset the states of all the context of the coder/decoder (each context is set to a state where 0 and 1 are more or less equiprobable)

Parameters

mqc	MQC handle

References opj_mqc::ctxs, MQC_NUMCTXS, and mqc_states.

Referenced by opj_mqc_reset_enc(), opj_t1_decode_cblk(), and opj_t1_encode_cblk().

◆ opj_mqc_restart_init_enc()

void opj_mqc_restart_init_enc ( opj_mqc_t * mqc )

RESTART mode switch (TERMALL) reinitialisation

Parameters

mqc	MQC handle

References opj_mqc::a, opj_mqc::bp, opj_mqc::c, opj_mqc::ct, and opj_mqc::start.

Referenced by opj_t1_encode_cblk().

◆ opj_mqc_segmark_enc()

void opj_mqc_segmark_enc ( opj_mqc_t * mqc )

SEGMARK mode switch (SEGSYM)

Parameters

mqc	MQC handle

References opj_mqc_encode(), and opj_mqc_setcurctx.

Referenced by opj_t1_encode_cblk().

◆ opj_mqc_setbits()

static void opj_mqc_setbits ( opj_mqc_t * mqc )

static

Fill mqc->c with 1's for flushing

Parameters

mqc	MQC handle

References opj_mqc::a, and opj_mqc::c.

Referenced by opj_mqc_flush().

◆ opj_mqc_setstate()

void opj_mqc_setstate	(	opj_mqc_t *	mqc,
		OPJ_UINT32	ctxno,
		OPJ_UINT32	msb,
		OPJ_INT32	prob
	)

Set the state of a particular context

Parameters

mqc	MQC handle
ctxno	Number that identifies the context
msb	The MSB of the new state of the context
prob	Number that identifies the probability of the symbols for the new state of the context

References opj_mqc::ctxs, and mqc_states.

Referenced by opj_mqc_reset_enc(), opj_t1_decode_cblk(), and opj_t1_encode_cblk().

◆ opq_mqc_finish_dec()

void opq_mqc_finish_dec ( opj_mqc_t * mqc )

Terminate RAW/MQC decoding

This restores the bytes temporarily overwritten by opj_mqc_init_dec()/ opj_mqc_raw_init_dec()

Parameters

mqc	MQC handle

References opj_mqc::backup, opj_mqc::end, and OPJ_COMMON_CBLK_DATA_EXTRA.

Referenced by opj_t1_decode_cblk().

Data Structures

Macros

Typedefs

Local static functions

Exported functions

Detailed Description

Macro Definition Documentation

◆ MQC_NUMCTXS

◆ opj_mqc_setcurctx

Typedef Documentation

◆ opj_mqc_state_t

◆ opj_mqc_t

Function Documentation

◆ opj_mqc_bypass_enc()

◆ opj_mqc_bypass_flush_enc()

◆ opj_mqc_bypass_get_extra_bytes()

◆ opj_mqc_bypass_init_enc()

◆ opj_mqc_byteout()

◆ opj_mqc_codelps()

◆ opj_mqc_codemps()

◆ opj_mqc_encode()

◆ opj_mqc_erterm_enc()

◆ opj_mqc_flush()

◆ opj_mqc_init_dec()

◆ opj_mqc_init_enc()

◆ opj_mqc_numbytes()

◆ opj_mqc_raw_init_dec()

◆ opj_mqc_renorme()

◆ opj_mqc_reset_enc()

◆ opj_mqc_resetstates()

◆ opj_mqc_restart_init_enc()

◆ opj_mqc_segmark_enc()

◆ opj_mqc_setbits()

◆ opj_mqc_setstate()

◆ opq_mqc_finish_dec()